[RTTY] KENWOOD TS2000 AND FSK
LA6FJA/K3RAG Stein Roar Brobakken
s-roabr at online.no
Tue Nov 7 18:06:49 EST 2006
I had same problem for 2 of mine TS2000.
1th problem were I disconnect the cable-interface @ 13pin with radio
switched ON. Then I burned IC13 in back side the radio. Changed this one
3 times b4 I learned to not disconnect with power on. ...if IC13 is
broken...then SINGLE TONE OUT....
2nd I use MMTTY and on setup there one for choose the FSK keying, if not
ONLY single TONE again ......
Fra: rtty-bounces at contesting.com [mailto:rtty-bounces at contesting.com] På
vegne av Kostas SV1DPI
Sendt: 7. november 2006 19:35
Til: RTTY REFLECTOR
Emne: [RTTY] KENWOOD TS2000 AND FSK
I build a simple interface for a friend's ts2000 (to connect the
ptt, cw, fsk).
My interface is simple with a resitor and an optocoupler 4N37.
I made the connections to acc-2 and cw as the manual of Kenwood ts2000
Ptt, cw and data in/out work like a charm. But the fsk doesn't play (i
listen a steady tone
in monitor, not diddles). I checked and the com port is ok
4n37 seems to work as i have a led in serious and lights with the right
Any menu to look for as my friend doesn't know the radio quite good, or
other things to check?
Ofcourse he can work afsk until we find a solution
Tnx for the help in advance
RTTY mailing list
RTTY at contesting.com
More information about the RTTY