[RTTY] Navigator and MMTTY

[Jack West]

Hi Gavin,
Here is my setup:

NAVIGATOR PORT ASSIGNMENTS: (ME)
NAV-CAT = COM4
NAV-PTT  = COM5
NAV-KEY = COM6
NAV-FSK = COM7
NAV-232  = COM8
NAV-CONFIG= COM9

NAVIGATOR OPTIONS: (ME)
CONFIG = COM9
FSK POLARITY = REV (FOR TS-950 AND OTHER KENWOOD RADIOS)
FSK PTT = ON
FSK BAUD = 45.45
FSK STOP = 1.5
WINKEY PTT = OFF
(SAVE TO DEFAULT)

MMTTY:
1. OPTIONS
2. SETUP MMTTY
3. MISC TAB
4. COM TXD FSK SELECTED
5. USB PORT
6. "C" LIMITING SPEED
7. OK
8. TX TAB
9. PTT PORT = COM 7 (MY NAV-FSK PORT)
10. RADIO COMMAND
11. COMPORT = COM4 (MY NAV-CAT)
12. BAUD = 4800 (FOR OLD KENWOODS)
13. VFO POLLING = KENWOOD (MY RADIO)
14. OK
15. OK

MMTTY OPERATION:
1. CLICK ON RED "TX" BUTTON
2. CONFIRM TX WITH FSK DIDDLE ON YOUR RADIO BY USING THE "MONITOR" FUNCTION OF THE RADIO.

THAT SHOULD DO IT.  I HOPE THIS HELPS.  I WOULD HAVE RESPONDED EARLIER TO YOUR EMAIL 
BUT I AM 2 1/2 WEEKS INTO RECOVRY FROM MAJOR BACK SURGERY, AND I HAVE NOT BEEN ABLE
TO SIT HERE IN THE GARAGE AT MY HAM SHACK.

BEST 73
DE
JACK / W7LD / "LUCKY DOG"
 
----- Original Message ----- 
From: robertsmg at aol.com 
To: w7ld at theriver.com 
Sent: Wednesday, March 28, 2007 4:59 PM
Subject: Navigator and MMTTY


Jack: 

I saw on the Navigator User's Group that you were using your Navigator with both MixW and MMTTY successfully. I received my Navigator last week and it works fine transmitting FSK using MixW, but with MMTTY (my preferred RTTY program), I can key the rig and generate a tone but no Baudot or diddle is transmitting.  Receive is fine with both programs.  Also notice that the FSK LED illuminates when transmitting with MixW, but the CW LED lights when attempting to transmit FSK with MMTTY. Rig is an Icom 775DSP. Appreciate any thoughts you may have on this problem before I post it on the Yahoo group. Thanks in advance and 73. 

Gavin J. Roberts W9EYE

--------------------------------------------------------------------------------
AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.