[RTTY] Re RSQ

[ns5b at comcast.net]

After being away from this for so long, I'm about to get back into it real soon. But, I have to admit, I ALSO had macros that would send my info too. The difference was, I had several of them that I would use. Some would send my name and qth, another would send my rig, antennas, etc, but I always sent the RST manually so I would't send 599 every time. If you were 567 you got a 567, etc....  

I like to know what my exact report is so I can tell how I'm doing, in case I need to make some adjustments. 

-------------- Original message -------------- 
From: "Tom Osborne" <w7why at verizon.net> 

> 
> HI Scott 
> 
> I'm sure most reports, plus name, QTH, ext, are all in a macro. I notice 
> when I call a lot of stations, they will hunt and peck my call, then the 
> name, etc, all come barreling out at full speed. 73 
> Tom W7WHY 
> 
> 
> > I can only assume (a very dangerous thing to do!) that the other op >does 
> > not know the the elements of the R-S-T system or how to make >an accurate 
> > report. 
> 
> _______________________________________________ 
> RTTY mailing list 
> RTTY at contesting.com 
> http://lists.contesting.com/mailman/listinfo/rtty