[RTTY] USOS !) !) !) !)

[Phil Snyder]

I had to ask for many repeats when I saw the !) as an exchange, but not 
enough to realize they were all from FL I guess. I am noton the 
contesting computer at the moment but will check for USOS when I get 
back to it. I was/am running N1MM with the MMTTY rtty engine.

Phil
N9LAH

John - AI4FR wrote:
> Hi gang,
>     I have a question that I hope some one can help me with. During the TARA contest I noticed about one person in 25 or so was having a problem with my sent text. One fellow emailed me about it(listed below) but I have not heard back from him.
>     The problem is the !) !) !) being received during RTTY instead of my state which is FL. Of course if you convert the !) to letters it is FL. The software I am using is MixW2 and I have macros for the contest exchange. There are no periods, commas or any thing else in the macro. But there is a greater then and less then signs as required by MixW2. The macro reads as follows <TX> <CALL> <RSTS> fl fl fl <MYCALL> <RXANDCLEAR> . I have also tried it with <TX> <CALL> <RSTS> <QTH> <QTH> <QTH> <MYCALL> <RXANDCLEAR> and it has made no difference. 
>
> Is there a problem with the way I have it set up or is it just a simple case of the other station not having USOS checked on their end? I do have USOS checked on my end and was thinking about unselecting it to see if it helps. But I like using USOS as there is a lot more synchronizing going on even if it is a tiny fraction slower. As for asking for repeats myself, it is extremely rare that I ever have to do so.
>
>
> Thanks in advance for any help that you can send my way.
>
> 73
> John / AI4FR
>
>
> The email is below...
>
> Hello John
> I dont know what was wrong when decoding your exchange...
> Both QSO, 40 and 20m I got    !)     as the exchange and this
> decoded by a PTC-II and MMTTY on a second screen.
>
> My reply....
>
> It is really great to hear from you again and thank you for the heads-up on the reception. I have done nothing different on this end and am using the same software mixw2 as I have been for a few years now. Of course that does not mean the problem is not on my end. 
>     I also noticed that about one person in 20 or 25 was having some trouble with my signal. If you were to decode the !) !) symbols and convert them to letters they equal FL FL which is the state that I live in. 
>     I am really glad that you sent me an email about this. Do you by chance have USOS checked in your software. USOS is "Unshift on Space". If not, this could be where the problem is at. Although I do not understand how it happens when I am using macros for the contest with no "periods", "commas" etc in them. This is the only thing that I can think of as a possible problem. Do you have any ideas of what the problem is incase you did have that setting checked in your software? I would really like to get this problem fixed. I never officially enter the contests by turning in a log, I do enjoy giving out a few points to the folks that do and having a problem like this is certainly not helping me any.
>
> Thanks again
> John
>
>
>
>
> AI4FR's Virtual Museum
> http://www.webspawner.com/users/ai4fr/index.html
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
>