[RTTY] fsk?

[Jim Rhodes]

What is menu item #30 set at? For most interfaces it should be set to "ON"
on most Kenwood rigs (of course it will be different item number on different
rigs). For some reason known only to Kenwood engineers they make their rigs to
key "upside-down". If nobody can print you it is a good guess that either you
are "flying inverted" or that you are set for different tones between the rig
and the software. Good luck, and I will look for you this weekend.

At 09:58 PM 1/4/2007, beau wrote:
>Hi all I am new to to group
>I am trying to use a ts570gs in fsk mode using a rig baster pro an mixw
>it sounds ok but no one can decode my transmit
>i have read a few post my question is for the fsk keying to work correct
>do i need to set the parity on my fsk com port to 5 n an 1an are there
>any other settings i need to set on that com port thanks beau
>_______________________________________________
>RTTY mailing list
>RTTY at contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty

Jim Rhodes K0XU
jim at rhodesend.net

Experience is the thing you have left when everything else is gone.