[RTTY] FSK with IC746

[Wolf, DL6JZ]

Hi Pete,

may be there is a wrong setting in the RTY menu of the IC-746:

- Press the button MENU until M1 appears in the display.
- Press F4 (RTY) and check if there are the correct settings
   (Mark 2125, Shift 170, Keying Normal).
- Press the button MENU again.

Then check if the settings of Mark and Shift in MMTTY are the same.

That should help. I am running FSK with my IC-746 with good success.

73 + 55
Wolf, DL6JZ



peter Jackson schrieb:
> Hi I have a pal who has been using AFSK with a IC746 with no problem, he has at last seen the light and gone over to FSK..but he has a problem, the rig transmits -0.86 than the indicated frequency, to get over that he has to set the XIT to compensate. He is using  MMTTY and has similar problems with N1MM. Anyone able to help please? 
> 73 Pete G3KNU
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>