[RTTY] Spotting

[Art Searle W2NRA]

Hi Jay,

In N1MM Logger if you put CQ at the beginning of any macro (any of 2 banks 
of 12) it will automatically go into Run mode.  I suppose you could do a 
work-around for this but that is something you'd have to do intentionally.

73 Art W2NRA
"Keep to the Code!"
w2nra.com
----- Original Message ----- 
From: "Jay" <ws7i at ewarg.org>
To: <rtty at contesting.com>
Sent: Saturday, November 03, 2007 01:02 PM
Subject: [RTTY] Spotting


>
> I think that most likely the mystery of the spotting is contained in this
> little piece that I clipped from a DX list.
>
>>I spotted some stations when running in the CQWW-SSB last weekend in
> error. The
> l>ogging program (N1MM) was set to spot all S&P Qs but I had neglected to
> tell
>>N1MM I was running. I don't believe most contesters do this intentionally
> as a
>>"self-spot".
>
> Phil correctly pointed out that N1MM wasn't the culprit.  The culprit is
> always the operator.  Since some of this was in CQWW I certainly wonder if
> the stations using packet entered the assisted class of operations.
>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty