[RTTY] A technical question (DigiKeyer)

[Joe Subich, W4TV]

> I've powerded the DigiKeyer not from FT-1000MP but from external 
> power supply (about 13 V). Does make it a difference or a problem?

No, it should not make any difference or create a problem.  The 
reference to powering from the radio was to indicate that the 
radio's aux output was fused and would have protected the radio 
in the event of a failure in DigiKeyer. 

73, 

   ... Joe Subich, W4TV 
       microHAM America 
       http://www.microHAM-USA.com 
       http://groups.yahoo.com/group/microHAM 
       support at microham.com 
  


> -----Original Message-----
> From: rtty-bounces at contesting.com 
> [mailto:rtty-bounces at contesting.com] On Behalf Of Jacek Janusz
> Sent: Thursday, September 27, 2007 12:40 PM
> To: rtty at contesting.com
> Subject: Re: [RTTY] A technical question (DigiKeyer)
> 
> 
> Hello Joe,
> 
> Thank you for the very detailed information about the DigiKeyer and
> for direct email to me from the microHAM company. Yes, it looks that
> the problem lies in the different place, probably in the transceiver.
> 
> JSW> If you were powering DigiKeyer from the +13.8 V output of 
> JSW> FT-1000MP (normal operation),
> 
> I've powerded the DigiKeyer not from FT-1000MP but from external power
> supply (about 13 V). Does make it a difference or a problem?
> 
> 73!
> Jacek.
> 
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 
>