[RTTY] Receiving RTTY on Sub VFO on FT1000MP?

[Tom Carrubba KA2D]

HNY Steve

The simple solution is to run a stereo cord from external speaker jack 
directly to sound card, bypassing the rigblaster. May have to defeat the 
recv wire from RTTY jack.

You do not need a second sound card.

I use the MP with the RASCAL.

Tom KA2D

----- Original Message ----- 
From: "KT0DX" <kt0dx at earthlink.net>
To: <rtty at contesting.com>
Sent: Saturday, December 29, 2007 9:15 PM
Subject: [RTTY] Receiving RTTY on Sub VFO on FT1000MP?


>I would like to know if there is a way to configure the FT 1000MP (Not a
>
> Mark V) to be able to receive RTTY on the Sub VFO.  I would like to use
> the Sub VFO to locate the station the DX is working when the DX station
> is operating split.  I have spent some time on the internet looking for
> information but have not come across anything.
>
> My set up here is a FT 1000MP and using a RIGblaster plus for the
> interface to the computer.  I usually use MMTTY for the program but I
> also have a HAL DXP38.
>
> Will I need a 2nd sound card to do this?
>
> Please if you have any information on this I sure would appreciate it if
> you could e mail me the information direct at KT0DX at earthlink.net.
>
> Thanks
> Steve (KT0DX)
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>