[RTTY] Using a K3 at Field Day

[Joe Subich, W4TV]

> K2 or most any Kenwood model.

The K3 identifies as a TS-570.  Either the K2 setting - 
or the general "Kenwood" setting (not TS-850) should 
work.  However, since the K2 did not use handshaking 
(unlike Kenwood), using the K2 setting would be a bit 
more flexible - and would allow CW/PTT to share one 
serial port with radio control if you need it. 

73, 

   ... Joe, W4TV 
  



> -----Original Message-----
> From: rtty-bounces at contesting.com 
> [mailto:rtty-bounces at contesting.com] On Behalf Of Ed Muns
> Sent: Monday, June 23, 2008 10:52 PM
> To: 'Rick Mintz'; writelog at contesting.com; 'RTTY Mailing List'
> Subject: Re: [RTTY] Using a K3 at Field Day
> 
> 
> > Does anyone know what rig choice in Writelog we should use to
> > allow rig control of the Elecraft K3?
> 
> K2 or most any Kenwood model.
> 
> 73,
> Ed - W0YK
> 
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com http://lists.contesting.com/mailman/listinfo/rtty