[RTTY] re It felt like MMTTY under N1MM was sending slowly

Mon Feb 16 20:47:09 EST 2009

Yep, I had already figured that out, a good while back.
Now to figure out what causes the slow-down I THINK I'm seeing.

73, doug

   From: "Dave AA6YQ" <aa6yq at ambersoft.com>
   Date: Mon, 16 Feb 2009 20:43:08 -0400
   Content-Language: en-us

   >>>8P9RY comments below

   From: rtty-bounces at contesting.com [mailto:rtty-bounces at contesting.com] On
   Behalf Of k0bx at arrl.net
   Sent: Monday, February 16, 2009 4:10 PM
   To: rtty at contesting.com
   Subject: [RTTY] It felt like MMTTY under N1MM was sending slowly

   MMTTY has a feature that slows down the output rate of the characters send.
   This is what the old UT-4's did. It for slow typest that wanted to get
   ahead of the buffer.

   In MMTTY plugin, go to options => TX

   There is a thing called "Digital Output". This should be set to full to the
   right. The default is about 80percent. This will speed up the output to
   full baud rate.

   >>>As Rich VE3KI pointed out on the DXLab reflector, the MMTTY online documentation says

   "Digital Output controls the volume of sound output from the sound card. You can also control this from the Windows mixer volume control. Try to set this so you do not have to make mixer changes when you operate MMTTY."

   >>>Rich verified this empirically, and I just confirmed it by inspecting the MMTTY source code.

      73,

	 Dave, 8P9RY

   _______________________________________________
   RTTY mailing list
   RTTY at contesting.com
   http://lists.contesting.com/mailman/listinfo/rtty