[RTTY] FT-1000MP Speaker

[Joe Subich, W4TV]

> Is there something in the MMVARI settings that I have to 
> change to use the AF output????

No, I used a simple 1/8" stereo audio cable between the AF Out 
and Line In of the soundcard for years. I still use the AF Out 
with the stereo line input of an old SoundBlaster Digital Music 
(MP3+) box when I'm trying to duplicate some non-microHAM 
configurations.  Do make sure your using a stereo cable and not 
an "attenuating cable" made for feeding a speaker output to the 
mic input of an audio recorder. 

> When I plug in the stereo plug from the Rigblaster to the front 
> Phones jack, I get the signals and can print.

Which Rigblaster?  As far as I know the Rig blasters (other than 
the Rig Blaster Pro) only work with TRANSMIT audio ... receive 
audio goes directly from the receiver to the soundcard and that's 
all I can say about someone else's product. 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: rtty-bounces at contesting.com 
> [mailto:rtty-bounces at contesting.com] On Behalf Of Tom Martin
> Sent: Friday, January 02, 2009 4:47 PM
> To: rtty at contesting.com
> Subject: [RTTY] FT-1000MP Speaker
> 
> 
> Thanks to all  that have replied.  I'm approaching senility 
> but I'm not quite there yet!  I haven't pushed the orange 
> Monitor button; so, no need to turn it off.  
> 
> I also tried to get receive audio from the AF Output on the 
> rear of the rig.  This allows me to turn down the AF but I 
> don't get any RTTY signals using the AF output.  When I plug 
> in the stereo plug from the Rigblaster to the front Phones 
> jack, I get the signals and can print.
> 
> Is there something in the MMVARI settings that I have to 
> change to use the AF output????
> 
> Murphy has struck in many ways today.  Typical day before the contest.
> 
> 73,
> 
> Tom W8JWN