[RTTY] need some help with an ft-950 and a signalink

[Joe Subich, W4TV]

SignaLink is AFSK only.  Connect the SignaLink to the DATA 
jack using the SLUSB6PM cable, set the FT-950 to PKT/LSB and 
configure MMTTY to use the SignaLink soundcard (USB Audio 
CODEC).  Enable PTT in the SignaLink (soundcard "VOX"). 
That should have you running very quickly ... 

Why is SignaLink not providing such basic user support?  

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: rtty-bounces at contesting.com 
> [mailto:rtty-bounces at contesting.com] On Behalf Of AA9VZ
> Sent: Wednesday, March 25, 2009 11:23 PM
> To: rtty at contesting.com
> Subject: [RTTY] need some help with an ft-950 and a signalink
> 
> 
> I need some help friends getting started. First time in the 
> digital mode. I have a Yaesu ft-950 rig using the signa link 
> usb and MMTTY. I am able to copy rttty just fine. On transmit 
> I only have a steady mark tone no didles. I have tried using 
> the packet setting on the rig since the rtty setting is for 
> fsk mode only. You must use the packet setting for afsk 
> modes? The signa link is for afsk only? This is worse than 
> any Yaesu HT owners manual Hi Hi.............
> 
> Thanks for the support my friends....
> 
> 73's
> 
> Terry AA9VZ