[RTTY] soundcard

[Robert Chudek - K0RC]

Here's the two solutions I see when "He wishes to keep his windows sounds on 
his speakers":

1) Each time he wants to operate AFSK, go into the Control Panel "Sounds & 
Audio Devices" and set the Sound Scheme in the "Sounds" tab to "No sounds". 
Revert to "Windows default" when done using AFSK.

2) Install a second sound card and use it for all Radio Digital Mode Input 
and Output. Use the original sound system (motherboard?) for all the Windows 
noises. The benefit here is that no changes will be needed when getting on 
the air.

73 de Bob - KØRC in MN



----- Original Message ----- 
From: "FireBrick" <w9ol at billnjudy.com>
To: "RTTY List" <rtty at contesting.com>
Sent: Sunday, October 04, 2009 5:10 PM
Subject: [RTTY] soundcard


> Trying to help get a fellow on RTTY.
> He Has a Creative Labs SB Audigy 2ZS
>
> Rig audio out -> to the soundcard Line in Jack which is Blue
> Rig audio in <- FROM the soundcard...is the problem
>
> He wishes to keep his windows sounds on his speakers.
> Which is normally the Green Line Out 1 port on the soundcard.
>
> Will the Line out 2 Black
> and
> Line out 3 Yellow  ports on the soundcard work?
>
>
> ----------------------------------------------------------
> Good judgment comes from bad experience and a lot of that comes from bad
> judgment.
> ----------------------------------------------------------
> TOWER/WEBCAMS and Weather Page
> @ http://hhweather.webhop.org
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty