[RTTY] Problem with MMTTY

[Don Hill AA5AU]

This normally happens when you lose audio level into the soundcard usually from a faulty connection from the radio to the audio
input of the sound card.  Or perhaps something has changed the Line Input or MIC input level of the sound card.  Go to Windows
Sounds and to Recording properties and try adjust the level to see if you can get it back to where it was before.

73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com 

-----Original Message-----
From: rtty-bounces at contesting.com [mailto:rtty-bounces at contesting.com] On Behalf Of allan1 at dejazzd.com
Sent: Monday, December 13, 2010 8:58 AM
To: rtty at contesting.com
Subject: [RTTY] Problem with MMTTY

   I have been using MMTTY with my Icom Pro 3 for a while with no problem!.  This morning when I clicked on the MMTTY icon-MMTTY
came up.  The  XY scope is fine, but there was hardly any signal on the graph nor much of a waterfall.  The RF gain was at it's
highest level. 
 
It decodes fine, the macros work as well and it does transmit a signal.  I made no adjustments at all. 
 
Any thoughts as to how to correct the problem would be greatly appreciated 
 
Allan W2TN 

 
 
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty