[RTTY] Sound Cards

[Jerry Flanders]

At 02:18 PM 1/20/2010, Richard Ferch wrote:
>... there is a situation where
>stereo can be useful in a sound card for RTTY, and that is when you have
>two receivers. You can feed the first RX audio into the left channel and
>the second RX (subRX or second radio) audio into the right channel, set
>up two copies of MMTTY, one configured to use each channel, and decode
>signals from both receivers at once with a single sound card.
>
>73,
>Rich VE3KI

The above is very useful for dual diversity when you have two 
independent receivers fed from two independent antennas, but you can 
also run multiple copies of MMTTY from the usual receiver's single 
mono audio stream. Each copy can use different decode parameters if 
you like. Just park them on different spots on the screen and have at 
it. I routinely do this, and each copy only adds about 2% to my CPU load.

Jerry W4UK