[RTTY] Icom IC-7600 200 Hz Filter on RTTY

[Don Hill AA5AU]

I used the standard "Fluttered Signals FIR" profile that comes with MMTTY.  It has a "TAP" of 56 and "FW" of 100, whatever that
means.  I use the FIR profile because I prefer using straight vertical and horizontal bars in the XY tuning as compared to the
ellipses.

73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com 

-----Original Message-----
From: Jeff Blaine AC0C [mailto:keepwalking188 at yahoo.com] 
Sent: Tuesday, June 01, 2010 4:11 PM
To: Don AA5AU; rtty reflector
Subject: Re: [RTTY] Icom IC-7600 200 Hz Filter on RTTY

Hi Don,

What are the settings used for the BPF in MMTTY for this work?

73/jeff/ac0c


--------------------------------------------------
From: "Don AA5AU" <aa5au at bellsouth.net>
Sent: Tuesday, June 01, 2010 10:56 AM
To: "rtty reflector" <rtty at contesting.com>
Subject: [RTTY] Icom IC-7600 200 Hz Filter on RTTY

> Here are some comparisons between the 250 Hz and 200 Hz filters in the 
> IC-7600 while copying E3X last night on 30 meter RTTY.
>
> http://rttycontesting.com/icom_ic7600/e4x.htm
>
> Comments appreciated.  I still be starting up a blog soon on my 
> adventures with the '7600 - stayed tune!
>
> 73, Don AA5AU
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>