[RTTY] Rascal - TS 2000

Tue Jan 11 10:09:53 PST 2011

I am running FSK with a Rascal. If you are using a USB to COM port converter
you MUST run EXT FSK. It is a program that corrects the timing of the USB
port when running FSK. It is installed in the same directory as MMTTY and
when you specify which port MMTTY is to use, there is a EXT FSK option. When
MMTTY is invoked it runs EXT FSK first (you will see it in the taskbar).

Clint Talmadge - W5CPT

-----Original Message-----
From: rtty-bounces at contesting.com [mailto:rtty-bounces at contesting.com] On
Behalf Of clements
Sent: Monday, January 10, 2011 7:35 PM
To: rtty at contesting.com
Subject: [RTTY] Rascal - TS 2000

Anyone running FSK with these? I am sure I had it going at one time, but
lost the settings. Right now, I can receive interference free in FSK, but
can not transmit. Operated the RU in AFSK in LSB. Stations higher in
frequency than I interferred with my reception. It I went higher in
frequency than them, there was no interference problem. I am using N3FJP
software with the K7RE(MMTTY) encode/decode engine.

Advice appreciated on the list or direct... ve3rcn at rac dot ca
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty