[RTTY] MMTTY AA6YQ-FIR-512

[Vilnis Vosekalns]

Hello Dave,
Monitoring all this without possibility to get time to radio -
hrrrrr, job obligations.....
For some time I use AFC in CQ with less sweep range, it maybe is
also reasonable to add it for Your high tap filter, here is my part of 
AFC. Was experimented also with AFCTime before but no real results.

Name=YL2KF CQ
Enabled=1
AFC=1
AFCFixShift=1
AFCSQ=32
AFCTime=8.000000e+00
AFCSweep=7.500000e-01
UOS=1

Just for test it , if You have time ,  73
Vilnis / YL2KF

On 15/01/2011 04:38, Dave AA6YQ wrote:
>>>> AA6YQ comments below
> -----Original Message-----
> From: rtty-bounces at contesting.com [mailto:rtty-bounces at contesting.com]On
> Behalf Of Michael Haack
> Sent: Friday, January 14, 2011 10:36 PM
> To: k0bx at arrl.net; rtty at contesting.com
> Subject: Re: [RTTY] MMTTY AA6YQ-FIR-512
>
>
> On MMTTY, version 1.68A, Is the AA6YQ FIR512 profile in there already??
> Seems to be the Multipath profile.
>
> Or am I missing something else?
>
>
>>>> The AA6YQ-FIR-512 profile is optimized for weak signal decoding.
>>>> To make it easier to obtain this profile, I have posted a USERPARA.INI
> file in
>
> <www.dxlabsuite.com/winwarbler/USERPARA.INI>
>
>>>> This file defines the following 8 profiles:
> - Standard RTTY
> - Fluttered Signals
> - Flutter Signals (FIR)
> - 23 Hz RTTY (MMTTY)
> - Multi-path
> - hyper sensitive
> - EU1SA
> - AA6YQ-FIR-512
>
>>>> To use it,
> 1. terminate MMTTY
>
> 2. in the folder that contains your MMTTY.EXE file, rename the existing
> USERPARA.INI file to USERPARA_ORIG.INI
>
> 3. save<www.dxlabsuite.com/winwarbler/USERPARA.INI>  into the folder that
> contains your MMTTY.EXE file
>
> 4. start MMTTY, open the Profile menu, and verify that the eight profiles
> listed above are available; then choose the one you wish to use.
>
>
>>>> If desired, you can revert to your original USERPARA.INI file by doing
> the following in the folder that contains your MMTTY.EXE file
>
> 5. terminate MMTTY
>
> 6. delete USERPARA.INI
>
> 7. rename USERPARA_ORIG.INI to USERPARA.INI
>
> 8. start MMTTY
>
>
>>>> If you instead wish to insert the AA6YQ-FIR-512 profile into your
> existing USERPARA.INI file, you can download it via
>
> <www.dxlabsuite.com/winwarbler/AA6YQ-FIR-512.txt>
>
>>>> and use a text editor like Notepad to insert it into the USERPARA.INI
> file in the same folder that your MMTTY.EXE file lives. As Joe W4TV has
> pointed out, standalone MMTTY is limited to 8 profiles, so you may have to
> remove a profile from your USERPARA.INI to make room for this one; if you
> have a profile named AA6YQ in your USERPARA.INI file, simply replace it with
> the AA6YQ-FIR-512 profile. Then restart MMTTY.
>
>>>> The information above is now permanently available via
> <http://www.dxlabsuite.com/dxlabwiki/AA6YQ-FIR-512>
>
>
>     73,
>
>         Dave, AA6YQ
>
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>