[RTTY] Any Software for an HD-3030

[Robert Chudek - K0RC]

I don't have hands on experience with this unit, but here's a link to an 
original ad for the HD-3030:

http://www.scribd.com/doc/9836903/Catalog-y1984-Heathkit-No865-Spring-Archive-Computer-Dch-h89-Kit

You have to scroll down to page 89 of 96 to find it.

 From the description, the HD-3030 is a typical Terminal Unit that can 
be interfaced with a computer via the serial port. I would associate it 
as "PK-232 like" in its features and operation. So if the fellow has the 
manual included with the TU (to know the command set), he should be able 
to get this running on RTTY, ASCII, and CW.

The answer to the question is: he can use HyperTerm or any other serial 
port comm software to command this unit.

73 de Bob - KØRC in MN

------------------------------------------------------------------------


On 7/16/2011 9:57 AM, Don Hill AA5AU wrote:
> I received an email from someone who has a Heathkit HD-3030 and wanted to know if there was any software that would run it from a
> serial port.
>
> I don't know so asking the group.
>
> Thanks...
>
> 73, Don AA5AU
> http://www.aa5au.com
> http://www.rttycontesting.com
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>