[RTTY] rtty right freq

[Joe Subich, W4TV]

If the RTTY signal has a RF mark frequency of 14.090 MHz (display on
FT-1000MP in RTTY), and the other station is using AFSK with "high 
tones" (2125/2295) if the AFSK is LSB the "dial" frequency will be
2125 Hz *higher* than the "correct" frequency (e.g., 14.092 125 MHz).
If the AFSK is USB, the "dial" frequency will be 2295 Hz *lower* than
the "correct" frequency (e.g, 14.087 705 MHz).

If the AFSK tones are different than the traditional "high tones"
the LSB "dial" frequency is <"FSK frequency" *plus* the lower tone>
and the USB "dial" frequency is <"FSK frequency" *minus* the higher
tone>.

73,

    ... Joe, W4TV


On 6/11/2011 1:17 AM, Kostas Stamatis wrote:
> After all this discussion abt mark and space, etc.
> When i see a station on 14090 (for example) in my mark v or kenwood 850,
> running FSK and i spot it. What should see a guy running USB and what
> someone running LSB. Many times i have seen spots with a wrong (for me)
> freq. So i would like to know where to look for....
>
> 73 Kostas sv1dpi
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>