[RTTY] setup

[Quentin Falkenbury]

Hi All
I am using mmtty and a signallink usb and a kenwood ts-120s.I have most everthing working but i am unsure how to adjust my tx audio as there are basically 4 different adjustments.Now i have the mixer control set as tigertronics 
recommended.However you can also adjust the tx in mmtty and the usb interface and of coarse the mic gain on the radio.When i used a kam i just left the alc on ,set the mic gain at about 10 oclock and apparently all was ok.
                thanks quentin