[RTTY] SO2V - K3 - dual receivers

[Larry Gauthier (K8UT)]

You can accomplish SO2V using a single sound card by feeding the AUX stereo 
input of your sound card with left channel from one receiver and right 
channel from the other receiver. Works fine for me in SO2V with a dual 
receiver transceiver..

If your soundcard is a Creative SoundBlaster product, be advised that the 
standard audio card drivers from Creative will not permit you to feed stereo 
from two different applications (two instances of MMTTY). Although I have 
not tried it, some hams report that they have successfully used SoundBlaster 
cards in stereo with the default windows drivers from Microsoft.

-larry
K8UT
-----Original Message----- 
From: Jims Laptop Mail
Sent: Thursday, October 13, 2011 10:03 AM
To: rtty at contesting.com
Subject: [RTTY] SO2V - K3 - dual receivers

Looking for suggestions for running SO2V with my K3 and N1MM. Do I need 
another sound card? I need to print both receivers. At present, I just print 
the main rcvr, then tune on the second rcvr then switch using the A/B. Not 
efficient.
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty