[RTTY] Trouble with MMTTY

[Robert Chudek - K0RC]

No audio is getting to the MMTTY decoder. Check the audio input cable to 
the sound card, check the mic/line in isn't muted in Windows, check the 
correct soundcard is selected in MMTTY.

73 de Bob - KØRC in MN
------------------------------------------------------------------------

On 9/23/2011 10:55 PM, allan1 at dejazzd.com wrote:
> I am using the Icom 756 PRO 111 with built-in  FSK along with MMTTY which I have been using together for a few years.  This morning when I tried RTTY the two X-Y graphs were not normal.  Normally I would see a bell curve, but instead it is showing straight noise about 5 mm above the base line even when I tune in a station which the PRO 3 is decoding.  Again, normally when a station is tuned in there are two perpendicular ellipses in the box adjacent to the X-Y graph.  Now I get what looks like a star burst (small) which doesn't change when I tune in a station.
>
> Anyone have any thoughts on how to fix this-would be very much appreciated.
>
> Thanks
>
> 73 Allan W2TN
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>