[RTTY] Multiple Decoders

[john at kk9a.com]

Like many others that already replied, I agree that it certainly is possible 
to run multiple decoders with one radio.  There are many ways to set this 
up. For 2011 CQWW RTTY I added a DXP38 to my station and I used the 
headphone audio for that decoder.  I ran it though a JPS NIR-12 filter which 
has a separate headphone jack and headphone volume control.  You could also 
split the audio from your existing source with a Y cable like many already 
suggested.  I opened a separate Writelog rttyrite window for the DXP38, the 
only issue is callsigns did not highlight like they do with MTTY.  I'm 
assuming that this is normal?

John KK9A

Subject: [RTTY] Multiple Decoders
From: Dick Flanagan <dick at k7vc.com>
Date: Tue, 31 Jan 2012 20:34:06 -0800

I know some folks run multiple RTTY decoders, with one of them often
being MMTTY and the other a DXP38.  Is it possible to run these two
decoders with one radio or is SO2R necessary?

Dick
--
Dick Flanagan K7VC
dick at k7vc.com