[RTTY] PROIII, MMTTY and New computer without serial or parallel ports

[Jim W7RY]

This is what I ordered for my new Dell desktop. Works great for FSK (45.5 
baud 5 bit) as well as PTT and CW.


Syba SD-PCI15029 8 Serial (RS-232) MultiPort PCI-Bus Card with 25-pin 
Octopus Cable

Ordered it from Amazon. Cheap enough and LOTS of ports!

73
Jim W7RY


-----Original Message----- 
From: rlauer1 at columbus.rr.com
Sent: Sunday, May 20, 2012 9:38 AM
To: rtty at contesting.com ; allan1 at dejazzd.com
Subject: Re: [RTTY] PROIII, MMTTY and New computer without serial or 
parallel ports

I just went through this due to a lightning strike. If the computer is a 
desktop, and you have a slot available I would recommend the Rosewill 
RC-305E. I bought mine from www.newegg.com. I tried a different serial card 
that I was able to buy from a local store but it did not support rtty.

Hope that helps you out.

Bob
K8ZD


---- allan1 at dejazzd.com wrote:
> I ha d to finally (after ten years) get a new computer which has onlly USB 
> Ports.
>
> I used to have the PRO III hooked up through ACC1 to my old computer for 
> MMTTY.  How to I hook things up now for MMTTY without a serial port?
>
> All help is greatly appreciated!
>
> Allan W2TN
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty