[RTTY] RTTY crosshair pattern

[Lee Roberts]

Backing up can be harzardous. Anyway, I modified my Kam+ several years ago (a 
Kantronics approved mod) so that I can hook up the scope and get a cross-hair 
pattern rather than using the LED panel on the front panel for tuning. But, it 
always displays 2 ellipses on the scope that I can never get to be at a 
perfect or even near perfect right angles. I don't know if it's possible to 
get 2 straight lines instead of the ellipses.

Bill Turner <dezrat1242 at yahoo.com> wrote ..
> ORIGINAL MESSAGE: 
> On Fri, 01 Feb 2013 20:52:08 -0700, Lee wrote:
> 
> >
> >I only use FSK but the Mark is set for 2125 Hz in the Kenwood TS2000 with a 
> >170 Hz shift and normal polarity. I've seen this problem with my TS450 and 
> >Icom706 also. I thought that it was a problem with the scope mod I did on 
the
> >Kam+ until I saw the same thing on the MMTTY scope.
> 
> REPLY: 
> OK, let's back up a little. Perhaps I misunderstood.
> 
> Exactly what are you seeing that is not right?
> 
> Bill, W6WRT