[RTTY] AL-1500 on RTTY

Dave Hachadorian k6ll.dave at gmail.com
Thu Nov 7 13:11:18 EST 2013


The AL-1500 seems to run nicely on RTTY with these settings:

CW/SSB Switch =  CW.
Ip = 750 ma.
Ig = 35 ma.
Blower = High

This is with a typical RTTY contest duty cycle of calling CQ for 
7 seconds, waiting 3 seconds for an answer, and calling CQ again 
(70% duty cycle).  I would probably throttle it back a little for 
a long-winded ragchew.

Dave Hachadorian, K6LL
Yuma, Arizona


-----Original Message----- 
From: rick darwicki
Sent: Thursday, November 07, 2013 8:25 AM
To: Group RTTY
Subject: [RTTY] AL-1500 on RTTY

My AL-1500 manual says nothing about what and how to tune for 
PSK, FM, RTTY, I.E.
Switch in CW or SSB ?  Max plate/grid currents in contests etc.

Any help, Ameritron gave me a song and dance?

Thanks



Rick, N6PE
=======================================
The only difference between a rut and a grave is the depth.

Website:  http://www.qsl.net/n6pe/index.html

eBay Store:  http://stores.ebay.com/N6PE-Radio-Tubes
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty 



More information about the RTTY mailing list