[RTTY] MMTTY FSK Help

[John Merrill]

When you are in N1MM, in MMTTY-options, in the TX tab is there a comport selected under PTT&FSK?
On Nov 9, 2013, at 10:58 AM, Richard Zalewski <dick.w7zr at gmail.com> wrote:

> MMTTY TROUBLESHOOTING
> 
> Went to get on WAE RTTY and MMTTY stand alone and MMTTY in N1MM does not
> work.  Receives fine.  Single tone only on transmit.
> 
> 
> 
> 
> 
> 1.  Was working perfectly when last used in CQWW RTTY
> 
> 2.  Rig- TS990
> 
> 3.  FSK from ACC2 to Rigblaster Plus
> 
> 4.. Using Edgeport USB to Serial- checks out OK
> 
> 5.  FSK works using radio alone
> 
> 6.  Grounding FSK line from ACC2 changes tone
> 
> 7.  Rigblaster keys on transmit  (single tone)
> 
> 8.  Device manager in Win 7 shows no problems
> 
> 9.  No diddle when keyed
> 
> 10.  N1MM and Rigblaster work fine for SSB
> 
> 11.  If an option for transmit other than the Soundblaster card is selected
> diddle is hears but reports are no tones on transmit
> 
> -- 
> Tnx es 73
> Richard W7ZR
> www.w7zr.com
> 
> *Be joyful in hope, patient in affliction, faithful in prayer*
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty