[RTTY] More on MMTTY problem

[Richard Zalewski]

Previous Post:

MMTTY TROUBLESHOOTING

Went to get on WAE RTTY and MMTTY stand alone and MMTTY in N1MM does not
work.  Receives fine.  Single tone only on transmit.





1.  Was working perfectly when last used in CQWW RTTY

2.  Rig- TS990

3.  FSK from ACC2 to Rigblaster Plus

4.. Using Edgeport USB to Serial- checks out OK

5.  FSK works using radio alone

6.  Grounding FSK line from ACC2 changes tone

7.  Rigblaster keys on transmit  (single tone)

8.  Device manager in Win 7 shows no problems

9.  No diddle when keyed

10.  N1MM and Rigblaster work fine for SSB

..................................................

11.  If an option for transmit other than the Soundblaster card is selected
diddle is hears but reports are just one tone on transmit

12.  Changed Comm ports for the Rigblaster....no change


Beginning to think it is Rigblaster problem however it works fine for SSB.



-- 
Tnx es 73
Richard W7ZR
www.w7zr.com

*Be joyful in hope, patient in affliction, faithful in prayer*