[RTTY] Long TX After Message Ends

[Joe Subich, W4TV]

Are you using AFSK (PKT) or FSK (RTTY)?

1) Disable PTT via CAT and use only PTT via RTS
2) Disable any CAT commands to switch TX/RX in MMTTY.
3) make sure "Sound card PTT" is not selected in
    microHAM Router
4) make sure MMTTY's "USB Port" is set to "C"
5) make sure "strict BPS" is not selected in microHAM
    Router
6) *Follow the example configuration* for MMTTY and your microHAM
    interface available in Router (Help | Download Documents) or
    online at www.microHAM-USA.com/support.html.

73,

    ... Joe, W4TV


On 9/16/2013 2:18 PM, KC4HW/Jim wrote:
> Using a FTdx5000, micro Keyer II and MMTTY
>
> Seems to have an excessive tail after the message ends?
>
> Jim/KC4HW
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>