[RTTY] 75 Baud ... RigExpert ...

[Bill Turner]

ORIGINAL MESSAGE:          (may be snipped)

On Fri, 20 Sep 2013 22:16:46 -0500, K0RC wrote:

>MMTTY can run 75 Baud but only on AFSK.

REPLY:

Say what? Is that a typo?

I have used MMTTY at 75 baud for years with FSK. All that is needed is to go
to the Decode tab and change the baud rate. 

I use direct com port output driving a homebrew transistor keyer to the
IC-7600's FSK input. Works fine, either 45.45 or 75 baud.

73, Bill W6WRT