[RTTY] Need Help

[Joe Subich, W4TV]

The K3 switches to the last used digital mode each time
you change modes.  Go band to band and change mode to AFSK A
on each band.  Also check to see what mode commands your
logging/digital software might be sending.

73,

    ... Joe, W4TV


On 9/28/2013 7:26 AM, paul ecker wrote:
> Joe- found that for some reason- the K3 keeps switching out of AFSK-A, to other digital modes-when I switch it back- all Ok for a while and then it switches again- seems sometimes it happens after changing. Any idea why that would happen?
>
>
>
>> ________________________________
>> From: "Joe Subich, W4TV" <lists at subich.com>
>> To: rtty at contesting.com
>> Cc: paul ecker <eckerpw at yahoo.com>
>> Sent: Friday, September 27, 2013 9:58 PM
>> Subject: Re: [RTTY] Need Help
>>
>>
>>
>> Make sure K3 DATA mode is AFSK A not FSK D.  Signalink is a dumb USB
>> sound card, not an FSK interface.
>>
>> 73,
>>
>>      ... Joe, W4TV
>>
>>
>> On 9/27/2013 9:22 PM, paul ecker wrote:
>>> I thought I had all setup for contest this weekend. Had both N1MM set and MMTTY as a backup ready. But tonight when I tried to jump in found that when I try to Tx, I get  a solid tone, no diddles. Any obvious things to check that might cause this?  Have  a K3 and signalink USB interface.
>>> thanks
>>> Paul
>>> kc2nyu
>>> _______________________________________________
>>> RTTY mailing list
>>> RTTY at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rtty
>>>
>>
>>
>>