[RTTY] Double-printing characters in 2Tone 13.09b

[Jeff Stai]

hi Don - While sometimes I find myself seeing double about 30 hours in to
the WW, I did not see any double characters as you describe.

I was using MMTTY as my main window and running 2tone v13.09b in clone
windows. Writelog 11.11C. Windows 7 of various flavors.

NB: With so many windows open I could easily have missed this since I am
looking for a window with a good callsign in it, and ignoring the noise.
Since MMTTY was my main I am looking there most often.

Since a callsign often leads the transmission, was it a callsign at a start
of the transmission? (Or rather, a transition from receiving noise to
receiving signal.)

- jeff wk6i




On Mon, Sep 30, 2013 at 7:55 AM, Don AA5AU <aa5au at bellsouth.net> wrote:

> I read Gary's post about his problems with 2Tone V13.09b but I experienced
> a different sort of issue.
>
> I used 2Tone V13.09b in my main decode window extensively for the first
> time with WriteLog this weekend. About 40-50 times, I got double printed
> characters on my screen.  As an example, my callsign sometimes came in as
> AAA5AU but it didn't just happen on my callsign, it happened on other
> callsigns. It seems to me it only happened on callsigns and it was always
> at the start of the callsign, but I'm not 100% sure of that. It could have
> happened to the report as well but I don't recall that happening. I only
> remember it happening at the start of callsigns, like PP49X, etc.
>
> I also had 2Tone versions 13.04 and 13.02 running in receive-only windows
> with no such problems.
>
> Did anyone else notice this behavior? If so, were you running WriteLog or
> N1MM?
>
> Thanks,
> Don AA5AU
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>



-- 
Jeff Stai ~ wk6i.jeff at gmail.com
Twisted Oak Winery ~ http://www.twistedoak.com/
Facebook ~ http://www.facebook.com/twistedoak