[RTTY] RTTY Software

[Joe Subich, W4TV]

N1MM Logger will meet those objectives using the MMVARI option
and DXPedition mode except that the receive spectrum will be
3 KHz based on whatever "split" offset you select.

K8UT and N2AMG can probably give you a full rundown on the DXPedition
mode capabilities.

73,

    ... Joe, W4TV


On 4/11/2014 12:56 PM, Dennis wrote:
> I'm looking for some RTTY software that I can use for a DXpedition. As long
> as it makes a log, I'm not interested in whether or not it interfaces to
> any
> particular logging program, as long as I can make an ADIF file from the
> program.
>
> Features I'm looking for:
> 1. Canned messages- at least 10.
> 2. Supports radio control, and split operation.
> 3. Shows roughly 5 KHz of band above my frequency.
> 4. Demodulates all signals within that 5KHz.
> 5. Ability to click on an indicated demodulated signal, have
> the callsign entered into the program, and a message sent.
>
> My concept is to set up a split operation, tell the ops to call on one
> frequency,
> have the program determine the call on any particular frequency, be able to
> click on that callsign and have the radio Rx move to that frequency without
> my having to tune it while keeping my Tx frequency constant, and then be
> able
> to work the station.
>
> Does anyone know of software out there that will do this?
>
> Dennis W1UE
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>