[RTTY] RTTY Software

[Larry Gauthier (K8UT)]

Dennis,

You've seen some good responses to your posting, none of which is an exact 
match for your 5 KHz multi-decoder specification. My biased opinion would be 
a combination of N1MM Logger with multiples of MMTTY and 2Tone decoders - 
still not an exact match to your specs. You could substitute MMVARI with 
FLDIGI for decoding and gain narrow (audio passband) multi-channel decoding 
but sacrifice the quality of the decoders in MMTTY and 2Tone. In a serious 
RTTY pileup I'm not sure that there would be any benefit.

Seems to me that today's optimal solution requires the op to tune the VFO to 
Rx stations whose Tx frequency was outside of the capture range of the 
decoder's AFC.

But - WHEN is your DXPedition? Timing may affect the available solution set.

-larry (K8UT)

-----Original Message----- 
From: Dennis
Sent: Friday, April 11, 2014 12:56 PM
To: rtty at contesting.com
Subject: [RTTY] RTTY Software

I'm looking for some RTTY software that I can use for a DXpedition. As long
as it makes a log, I'm not interested in whether or not it interfaces to any
particular logging program, as long as I can make an ADIF file from the
program.

Features I'm looking for:
1. Canned messages- at least 10.
2. Supports radio control, and split operation.
3. Shows roughly 5 KHz of band above my frequency.
4. Demodulates all signals within that 5KHz.
5. Ability to click on an indicated demodulated signal, have
the callsign entered into the program, and a message sent.

My concept is to set up a split operation, tell the ops to call on one
frequency,
have the program determine the call on any particular frequency, be able to
click on that callsign and have the radio Rx move to that frequency without
my having to tune it while keeping my Tx frequency constant, and then be
able
to work the station.

Does anyone know of software out there that will do this?

Dennis W1UE

_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty