[RTTY] BARTG Sprint 75

[Joe Subich, W4TV]

Note: you will need to use AFSK, a *real* serial port, or an interface
(like the microHAM DigiKeyer, microKEYER, DigiKeyer II, microKEYER II,
micro2R or MK2R+) that provide FSK via UART.

Interfaces/USB ports that rely on EXTFSK for FSK will not do 75 baud.
Note, if you use MMVARI you will need to select the FSK8250 (UART)
driver as the standard driver implements software generated FSK.
Without FSK8250 MMVARI will generate 45 baud RTTY regardless of the
speed selected.

73,

    ... Joe, W4TV


On 4/26/2014 5:16 PM, Hank Garretson wrote:
> The BARTG Sprint 75 is Sunday.
>
> http://s3.spanglefish.com/s/7850/documents/contests/sprint75/rules/current/bartg%20sprint%2075%20rules.pdf
>
> This is a fun contest because 1. It's a sprint--no stupid 599. It's 75
> baud--print really zips across the screen.
>
> If using MMTTY to decode, SETUP, DECODE, 75 baud.
>
> If using 2Tone, SETUP, 75 baud.
>
> N1MM users Select Contest Type BAR75RTTYS
>
> CU Sunday at 75 baud.
>
> Diddle Exuberantly,
>
> Hank, W6SX
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>