[RTTY] uHam & Win7 question

[David VE3VID]

The PC is 3Ghz.      Windows 7/32  installed seamlessly.
Router only starts so slowly when the system has been restarted.  Otherwise it starts rapidly on successive program starts.

http://www.ve3vid.webs.com/

> Date: Fri, 15 Aug 2014 14:44:34 -0400
> From: lists at subich.com
> To: rtty at contesting.com
> Subject: Re: [RTTY] uHam & Win7 question
> 
> 
>  > It also gives 7 banjo tones (audio acknowledgements) during start up.
> 
> The audio tones indicate that Windows needs to *create* the virtual
> serial ports each time you start microHAM Router.  That is abnormal
> and represents a problem in *your Windows installation*.
> 
> Start-up time for a typical moderate system (2.1 GHz Core2Duo, 4 GB
> RAM) with all current Windows 7/64 updates is around 30 seconds and
> will vary depending on what other processes are running when Router
> is launched.
> 
> 73,
> 
>     ... Joe, W4TV
> 
> 
> On 2014-08-15 11:12 AM, David VE3VID wrote:
> > Hello everyone
> > Since I installed Windows 7 on my PC microHAM Device Router functions differently.
> > The program takes about 1 minute to start after clicking the program icon.  It also gives 7 banjo tones (audio acknowledgements) during start up.  I don't really care if this is the way the program runs under Win7 - it just seems very odd.
> > Anybody else running uHAM Device Router also experience this?
> > regards & 73David
> > http://www.ve3vid.webs.com/
> >   		 	   		
> > _______________________________________________
> > RTTY mailing list
> > RTTY at contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty