[RTTY] Get selective DX-Spots by Email

[Dave AA6YQ]

>>>AA6YQ comments below


-----Original Message-----
From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of Phil Sussman
Sent: Thursday, February 13, 2014 12:34 PM
To: Walter Dallmeier
Cc: rtty at contesting.com
Subject: Re: [RTTY] Get selective DX-Spots by Email

Walter has done a fantastic job.

Now all that remains is:

1. Once a spot is received from MyDXspot, it should automatically
    be decoded and the rig set to the precise spotting frequency.

2. The call sign of the spotted station should then be loaded into
    software -- the station called and automatically logged.

3. A QSL should be directly uploaded to eQSL, QrZ logbook and LOTL.

4. A new 'spot' for this QSO should be sent to the DX Cluster.

5. The operator need not be disturbed. He can continue his/her nap.

>>> You forgot "update the filters to reflect that the entity, entity-band, entity-mode, zone, zone-band, zone-mode, state,
state-band, state-mode, IOTA, grid-band, prefix, prefix-band, and prefix-mode are no longer needed".

>>>That should keep you awake...

       73,

                Dave, AA6YQ