[RTTY] Yaesu MK-V sidetone level adjustment

[Jim Hoge]

Yes but the monitor level function only works for voice mode, it has no effect on cw or rtty sidetone levels. Until I discovered that there is indeed a sidetone level adjustment for cw, I assumed that the levels were fixed. I haven't yet played with the level adjustment for cw as it will entail a bit of work just to gain access to the trimmer pot, hence the original question.There is something to be said for the ability to readily access the back side of one's radios. I wish the room were bigger to allow walk around access to the rear of the desk.


Jim




On Sunday, January 12, 2014 3:39 PM, Jay WS7I <ws7ik7tj at gmail.com> wrote:
 
Doesn't the 1KMP have a monitor volume on the front panel like the FT2K ?


On 1/12/2014 1:36 PM, Jim Hoge wrote:
> Is it possible to adjust the sidetone level for rtty on the Yaesu FT-1000MP Mark-V? There is an adjustment for cw sidetone level on the back of the unit. I was wondering if this has any effect on the rtty sidetone level. The rtty sidetone has always been deafeningly loud with this radio.
>
> Tnx es 73,
> Jim W5QM
>