[RTTY] Help with MMTTY
Jeff Stai
wk6i.jeff at gmail.com
Sat Jun 14 19:07:36 EDT 2014
Go into Setup, Demodulator tab. At the bottom are two boxes with the label
"HAM default" next to them. They are the mark and shift. Set the mark where
you want it to be and save. (You might also have to click Set Default, I
don't remember right now.)
Hope this helps - jeff wk6i
On Sat, Jun 14, 2014 at 3:18 PM, John Geiger <af5cc at fidmail.com> wrote:
> I recently did a reset on my netbook which completely cleaned the hard
> drive and reinstalled Windows, so I had to go thru and reinstall all of my
> programs. One of them is MMTTY, which I now seem to be having some trouble
> with. It defaults to Mark and Space frequencies above 2000hz with the
> normal shift of 170hz.
>
> However, I like to listen to RTTY at a lower pitch, like 500hz or so. To
> do this, I click on the waterfall until the signal appears around this
> frequency. It shows 500hz or so on the MARK box. When I go to transmit,
> it takes the MARK back to 2125hz. I don't think it did this before, but I
> don't remember for sure. Anyways, I can't seem to contact anyone now
> unless I tune the RTTY signal in at 2125hz as well.
>
> What do I need to do differently to get MMTTY working like it used to
> before?
>
> 73 John AF5CC
>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
--
Jeff Stai ~ wk6i.jeff at gmail.com
Twisted Oak Winery ~ http://www.twistedoak.com/
Facebook ~ http://www.facebook.com/twistedoak
More information about the RTTY
mailing list