[RTTY] RTTY N1MM Logger questions

[W0MU Mike Fatchett]

RTTY spotting is a problem.  I see tons of spots that say CW which are 
really RTTY or other Digital modes.

The info window will let you know when you are spotted.  You should also 
see something in the bandmap that shows where you are running.

Head over to the N1MM group.

Mike W0MU

On 5/12/2014 7:49 AM, iw1ayd - Salvatore Irato wrote:
> Hi Dick and all.
>
> For the #1 I have adopted a plain solution. Out of any filter command 
> that could be made and then
> stored into the Telnet window macro buttons I use only the RCK-DCS - 
> RCK Digital Cluster System.
> Much easy and useful for RTTY only, just one command to get rid of any 
> other mode, CW.
> Still PSK is coming in, as with some more exotic modes, but this would 
> depend much more on entries tagging,
> thus the inability to filter out all things. At least in mine knowledge.
>
> More on:
>
> http://www.walter-dallmeier.de/software-by-dl4rck/rckskimmer/digital-cluster-system/ 
>
>
> BTW there are both, skimmers and not skimmers - human - entries: quick 
> and dirty.
>
> For the #2, no way on the band map, but what Rich, VE3KI, wrote is 
> enough to get known when you are spotted.
> Again in the N1MM Logger Info windows there are both evidences for 
> spots. Those generated by the skimmers
> and those by humans. Yours callsign on air is the key to select spots 
> to be shown there.
>
> Hope that I added some more to the already exhaustive Rich responses, 
> not just wasting bandwidth ;-)
>
>        73 de iw1ayd Salvo
>
>
> On 12/05/2014 15:01, rtty-request at contesting.com wrote:
>> Message: 5
>> Date: Mon, 12 May 2014 01:37:26 -0400 (EDT)
>> From: RLVZ--- via RTTY<rtty at contesting.com>
>> To:rtty at contesting.com
>> Subject: [RTTY] RTTY N1MM Logger questions
>> Message-ID:<bd3bd.377b2474.40a1b816 at aol.com>
>> Content-Type: text/plain; charset="US-ASCII"
>>
>> Hi Guys,
>>   Wondering if a N1MM Logger person could answer  the following 
>> questions
>> regarding RTTY operations while using N1MM Logger  software:
>>   1) Is there a skimmer filter that can be used so  that only RTTY 
>> skimmer
>> spots are posted to my band map window?  (I'd like  CW skimmer spots 
>> deleted)
>>   2) Currently, my Callsign is not shown  in the band map window when 
>> I'm
>> spotted.  Is there a way I can turn that  feature on?  (I want to 
>> make sure
>> that I don't QSY shortly after being  spotted)
>>   Thanks & 73-
>>   Dick- K9OM
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty