[RTTY] W1AW/0 KANSAS RTT

[Jeff AC0C]

Ron,

I could not use the skimmer system this time and the Q rate was really 
miserable.  I think if I could make this work right, the Q rate would be 
double.  Of course, it would have helped that I started out inside the RTTY 
subband instead of the phone band - but that's a different issue.

Did you use N1MM?  I'm trying to figure out how to get the blasted logger to 
NOT change the TX focus when I click on a spot.  Or to push the spot 
frequency to the VFOB (leaving the TX focus on VFOA).  This is the gating 
issue at the moment.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- 
From: Ron Kolarik
Sent: Wednesday, November 05, 2014 2:17 PM
To: Jeff AC0C ; RTTY Reflector
Subject: Re: [RTTY] W1AW/0 KANSAS RTT

Jeff that's pretty much what I did when it was my turn. It helps spread
the pile out once
they figure out you won't work more than one on the same frequency.

73,
Ron
K0IDT

On 11/5/2014 10:55 AM, Jeff AC0C wrote:
> We  be running W1AW/0 over the next week and I will be hosting most of the 
> RTTY.
>
> Today it’s 12m & 17m from 1800-2000.  Starting on 12m and jumping to 17m 
> depending on traffic.
>
> Approx freq:
>
> 24923
> 18105
>
> Important:  If all goes according to plan, will be using a broadband 
> skimming utility to read all the callers.  So do NOT QSY and chase the 
> last caller in normal DXpedition style.  Stay on your frequency and I will 
> work to you.
>
> 73/jeff/ac0c
> www.ac0c.com
> alpha-charlie-zero-charlie
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty