[RTTY] BARTG 75 Sprint Calls

[Joe Subich, W4TV]

> On my MMTTY Setup, the "HAM" button not only sets the tones back to
> default but it also puts it back to 45 baud.

Simple solution ... on MMTTY's Setup | Demodulator tab *uncheck* the
box that says "Fixes 45.45 baud" and "HAM" will not reset the data
rate.

73,

    ... Joe, W4TV


On 2014-09-24 11:22 AM, Tim Shoppa wrote:
> Gary writes:
>> I had a couple of times last weekend where I would set
>> MMTTY at 75 baud and then after a couple of QSOs I
>> could only get garbage.  When I went back to the MMTTY
>> setup screens I found that somehow the 75 speed
>> setting had reverted back to 45!  This happened a couple
>> of time to me.
>
> On my MMTTY Setup, the "HAM" button not only sets the tones back to default
> but it also puts it back to 45 baud. I had developed the habit of hitting
> "HAM" whenever I wanted to disable or reset AFC.
>
> Tim N3QE
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>