[RTTY] GRITTY 1.2

[Alex, VE3NEA]

Hi John,

Go ahead and use GRITTY with your 1500-Hz filter. You will see more garbage on the screen when there is no signal, but decoding 
accuracy will not be significantly degraded.

73 Alex VE3NEA




On 2015-04-15 10:09, John L Merrill wrote:
> Unfortunately in some radios, like my TS-590, when in FSK(sorry I do not
> like AFSK) mode, filter options are limited. In my case max filter width is
> 1500HZ.
>
> 73, John N1JM
>
> -----Original Message-----
> From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of Jay WS7I
> Sent: Wednesday, April 15, 2015 06:25
> To: rtty at contesting.com
> Subject: Re: [RTTY] GRITTY 1.2
>
> Alex
>
> Nice to see you making tools again.  They are appreciated.
>
> 73 Jay WS7I
>
> On 4/15/2015 5:57 AM, Alex, VE3NEA wrote:
>> Hi Peter,
>>
>> Since GRITTY is not just a new application but a new technology, I did
>> not want to invest too much time in its bells and whistles until the
>> technology itself is tested and accepted by the RTTY community. In its
>> current state, the program has a minimalist user interface, it does
>> not even have a Settings dialog. I can add new features if they are
>> required for testing, such as waterfall resizing to fit GRITTY's
>> window on the conterster's screen, but other, 'nice to have' features
>> have to wait a little bit. Custom font size and colors is now on my
>> to-do list for the future versions, thank you for the idea.
>>
>> The Data File section in the Help file contains some information about
>> the INI and other files used by the program. Until the Settings dialog
>> is added to the program, some settings may be changed only in the ini
>> file. This is currently undocumented as these options will be removed
>> in the future. One such option is default mark and space tones: you
>> can change them by changing the value of the DefaultHighTone parameter
>> in the ini file. This parameter sets the higher of the two tones, the
>> lower one is 170 Hz below it. Another option enables the Save Audio
>> and Play Back Audio buttons intended for debugging. To enable these
>> buttons, add the following lines at the bottom of Gritty.ini:
>>
>> [Debug]
>> ExpertMode=1
>>
>>
>> 73 Alex VE3NEA
>>
>>
>>
>>
>>
>>
>> On 2015-04-15 06:48, Peter L. Jackson wrote:
>>> Hi Alex,
>>> GRTTY 1.2 runs much better in this version.
>>>
>>> Can you put in a drop down menu and or a tutorial in changing the INI
>>> file.
>>>
>>> The size of the decode print FONTS are very small for me.
>>>
>>>   From the Demo I take it you are using Linux; the pics show 2 new
>>> ICONS (save and a open folder) on the tool bar that don't show up on
>>> my Windows 7 64 Bit OS being used here ??
>>>
>>> Thank you.
>>> Peter
>>> VK6KXW
>>> _______________________________________________
>>> RTTY mailing list
>>> RTTY at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rtty
>>>
>>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>