[RTTY] N1MM so2r - sending the desired Fx on the other radio immediately after the 1st msg

[Sam Leslie - W4PK]

Hello Bostjan

In earlier versions of n1mm there was the capability of either selecting "First One Wins" or "Last One Wins" for TX control.  I can't find it in the version that I have, and the default is "Last One Wins" which I prefer to use anyway.  For years I have used the last one wins feature for my operation and I prefer doing it this way anyway.

I have my system setup for ESM control and right-click enabled so I can right-click in either DI window to control transmission.  For example, if I am sending CQ (contents of the F1 macro)  on both radios I right-click in one DI window and when it has finished sending I right-click in the other DI window.  

If I receive a call in one DI window, left-clicking on it places the call in the Entry window.  Then I right-click in that DI window and the software immediately terminates transmitting CQ from the other DI window and sends the contents of F5 and F2 to that station.  Then while receiving the confirmation information from that station I right-click in the other DI window to continue CQing on the other radio.  Upon entering (left-clicking) the information from that station I immediately right-click in his DI window to confirm and log (i.e. the contents of the F3 macro).  The CQ transmission on the other radio immediately stops when I left click in his DI window.

If you have stations calling on each radio then you follow the same procedure as above.  With some practice you will be able to interleave the messages so that while you are receiving the information from one radio you will be sending your information on the other radio.

To set up n1mm+ for this operation, you need to click on Config at the top of the Entry window and then click on "Enter Sends Message (ESM mode)".  Next you click on the "Setup" button at the top-left of the DI window and click on "Rt Click = Return NOT Menu".  

Sam Leslie
w4pk at arrl.net

-----Original Message-----
From: Bostjan Voncina - S55O [mailto:bostjan.voncina at gmail.com] 
Sent: Tuesday, August 25, 2015 1:55 AM
To: RTTY Reflector
Subject: [RTTY] N1MM so2r - sending the desired Fx on the other radio immediately after the 1st msg

hi!

is there a way how to make n1mm+ send the desired msg on the other radio just after the msg on radio 1 has finished sending its msg? without stopping the.msg of radio 1 in the middle?

like cqing on radio 1 and in the middle of the cq pressing f2 for the exchange on radio 2 that gets on the air immediately after the cq on radio
1 finishes?
like some kind of queue for sending.

i know it works for 1 radio..but it doesnt work for me with ctrlfx macros o have i missed something?

i tryed.first win..second win but they are not ment to be used for this.

thank you
bostjan s55o
I tryed on n1mm reflector, but so far no hits :) please advise...