[RTTY] Writelog and Flex 6000 radios

[Keith Regli]

Ross,

I'm not sure what you're seeing, but I've had it working for a while.  The
one I sometimes miss is the DAX button on the right control panel (about
half way down near the mic compression settings).  That has to be blue, not
grey.  Otherwise, I just set it up on DAX channel 1, set 2-Tone to use DAX
1 for the transmit and go.  I've been fiddling around with tones and now
use 1415 and 1585 - when used with a default 300 hz filter on DIGL, I have
less work to do.  Add COM4_DIGITAL_OFFSET_HZ=-1415 under [Rigs] in
writelog.ini to get the frequency right.

Keith (K7KAR)

On Mon, Jul 13, 2015 at 12:41 PM, Ross Biggar <rbiggar at ihug.co.nz> wrote:

> Has anyone managed to use Writelog with a Flexradio 6700 or a 6500. I can
> get the program to put the radio into transmit, but
> I cannot get any transmit audio (ie the DAX transmit does not show a red
> line.
> If you have Writelog running on a Flex please let me know how you did it.
> Thanks
> Ross
> ZL1WN
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>



-- 
Keith Regli
mailto://keith@kregli.com
http://www.kregli.com