[RTTY] IC-7100 FSK connection question

[Bill Turner]

OK Hector, sounds like you are on your way. Good luck and hope to see
you on the air someday.

73, Bill W6WRT
p.s. No more Radio Shack in my town either.  Sigh. 


------------ ORIGINAL MESSAGE ------------(may be snipped)

On Fri, 9 Oct 2015 21:08:52 +0000 (UTC), you wrote:

>Bill I got it, just because I'm using the  Hsend (pin 3) like they recommend to Key the amp, was my doubt  if the Hsend  in/out function can be  possible conflict, but now that I receive the orientation where  and what to do will work in that path using only the  13 pins (ACC Socket), I will do not buy the OPC-599 adapter $60 if is not needed to have just ACC 1 and ACC 2worst case scenario will use the radio rear mic jack to get a PTT line when build a new External Keypad to send the internal 4 memories
>Thanks for the help, I need to order some little parts No more R S locally  and dig the drawer for some other parts, build it and leave it in Mexicali to have that radio ready to use.
>
> J.Hector Garcia  XE2K / AD6D
> Mexicali B.C DM22fp / El Centro
>P.O.Box 73 
>El Centro CA 92244-0073
>USA
>http://xe2k.net
>Tweeter @XE2K