[RTTY] Great idea for the next 75 baud contest

[Gary Senesac]

Yeah but...

When you create this new Profile in MMTTY you are doing more than just just changing the baud rate settings. Whatever Profile you use for your base settings will also be used for your new 75 baud Profile. If during the contest you decide that MMTTY isn't decoding well enough and want to try switching to a different Profile you will find yourself back to 45 baud!

The only way to prevent this is to create several new Profiles for 75 baud, each from a different existing base Profile with different taps and other settings.  You will need to name them appropriately by the base Profile settings - Flutter 75, FIR 75, etc.

This problem may be mitigated somewhat if you run multiple decode windows using either other instances of MMTTY set for 75 baud, or multiple 2Tone instances set to 75 baud with different decode parameters.

Gary AL9A
Sent from my Kindle HDX

On September 20, 2015, at 5:01 PM, Bill Turner <dezrat at outlook.com> wrote:

K9OMW had a great suggestion for the 75 baud contest. 

Once you have changed MMTTY over to 75 baud, you can save the changes
as a new Profile (use Assign Menu) in the Profile menu. Choose a
numbered Profile such as Profile 8 and rename it 75 baud or whatever.
The next time just change Profiles  instead of having to go through
the multiple steps. When the contest is over, just change back. Works
great.

Thanks, Bob!

73, Bill W6WRT

_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty