[RTTY] CQ WPX RTTY question

[John Barber]

Like Phil, I keep all the spots coming up and, if needed,  just hover to see
which area they came from. Watch them coming in on telnet to see band
openings.
Most important is to check the callsign and net before calling them. Too
often a whole string of stations will call a spot, all the same amount off
frequency, by just clicking a spot and not listening first.

GL,
John GW4SKA/GW0A

-----Original Message-----
From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of Michael Rapp
Sent: 11 February 2016 14:57
To: RLVZ--- via RTTY <rtty at contesting.com>
Subject: Re: [RTTY] CQ WPX RTTY question

Speaking of assistance, this will be my first contest to operate assisted.
I've been practicing a bit over the past few days, getting N1MM+ set up with
a telnet cluster and bandmap.

I am really curious to see how effective this is given my antennas are
fairly low and compromised.  I wonder just how many of the spotted stations
I will be able to actually decode.

I think I can tweak the cluster to only show me spots from the US, but I
wonder if I can limit it down more.

73,
--
/*/-=[Michael / KT5MR]-=/*/
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty